Table of Contents
Advertisement
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface
and all the heat-generating components are placed on their
respective holders or stands.
2. Ensure all function switches are OFF prior to reworking.
3. Ensure all terminal connections are properly secured.
IMPORTANT : Please refer to the CONTROL PANEL GUIDE
A. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
provided in the package.
2. With all function switches deactivated and all terminal connections
properly secured, switch ON the device using the Main Power Switch
("8" from the control panel).
3. The display panels, "10" and "12" will temporarily show the product
name in a scrolling manner and then display "
the scroll is finished. The system will remain in this state until the user
activates a function.
B. HOT AIR GUN
1. Follow the initial procedures above, "A. INITIAL PROCEDURES".
2. Activate Hot Air Gun Function Switch ("14" from the control panel).
3. The system will immediately start to blow air at an airflow rate of 50
while rapidly and safely increasing the air temperature to 100°C
(default system operating parameters). These values will be reflected
on the Hot Air Gun Air Temperature and Air Pressure display panels,
"13" and "12" from the control panel, respectively. The metal ball
inside the air pressure gauge ("1" from the control panel) will also
settle somewhere in the middle of the visible area indicating that the
system is blowing air at an average or normal rate.
OPERATING GUIDELINES
page for buttons and display panel directory.
OFF
" on all rows once
9
Advertisement
Table of Contents
