Table of Contents
Advertisement
A. Auto-Sleep Mode (Hot Air Gun)
The device has a built-in auto-sleep mode feature such that if the
Hot Air Gun sits on its handle and remained idle after a certain period
(the prefix of the display for Hot Air Gun air temperature will also
change from "
mechanism is triggered by a countdown timer so when the time has
elapsed, the system will blow air (at room temperature) at maximum
rate in order to bring down the temperature. During this time, the prefix
of the display for Hot Air Gun air temperature will also change from "L"
C
to "
". Once the temperature drops to approximately 90°C, the Hot Air
Gun will automatically stop and show an all-dash "- - - -" display
indicating that the system is now on sleep mode.
B. Changing SLEEP Mode Timer (HOT AIR GUN)
By default, the system has 5-minute countdown time before the
hot air gun goes to sleep mode. This can be altered by the following
procedure.
1. While the hot air gun is on stand-by mode ("
on the panels "13" and "12"), hold both UP and DOWN
buttons of the Hot Air Gun Temperature Adjustment Buttons .
2. Wait until "
display panel, "13".
3. Release the buttons when "
4. Adjust the time using the same UP and DOWN buttons of the
Hot Air Gun Temperature Adjustment Buttons .
5. Confirm the change by activating the Hot Air Gun Function
Switch .
6. The system will immediately switch back to operation and use
the defined countdown parameter for the entire usage.
12
AUTO SLEEP FUNCTIONS
H
L
" to "
") , the device will switch to sleep mode. This
t005
" is displayed on the Hot Air Gun Temperature
t005
" appears.
OFF
" is displayed
Advertisement
Table of Contents
