Table of Contents
Advertisement
NOTES:
The sleep mode timer is configurable between 1 and 30 minutes.
●
Sleep mode settings for Hot-Air Gun and Soldering Iron is saved
●
into the memory an shall remain effective until it is reset or new
data is entered.
C. Activating Soldering Iron Auto-Sleep Mode
The Soldering Iron's SLEEP mode is deactivated by default. Follow
the set of procedures below to activate this feature.
CONDITION: SOLDERING IRON function is inactive.
1. While soldering iron is displaying "
both UP and DOWN buttons of the Soldering Iron Temperature
Adjustment Buttons ("4" from the CONTROL PANEL GUIDE page).
2. Wait until "
panel. This means sleep mode is currently turned OFF.
3. Release the two buttons after the change in display.
4. Use the same two buttons to adjust the countdown time.
means solder iron will go to sleep in 1 minute. Timer is adjustable
from 1 to 60minutes.
5. Confirm the change by activating the SOLDERING IRON switch.
6. To DEACTIVATE this feature, simply follow the above procedures.
This time, select "
7. During sleep mode, the soldering iron temperature display panel
will show an all-dash, "- - - - " .
8. To wake the soldering iron from sleep mode, press the soldering
iron temperature adjustment buttons.
AUTO SLEEP FUNCTIONS
t0FF
" appears from soldering iron temperature display
tOFF
" .
OFF
" or in stand-by mode, push
"t001"
13
Advertisement
Table of Contents
