Measures For Preparation; Unpacking; Transporting; Storage - Samson 3966 Mounting And Operating Instructions

Measures for preparation

4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received with the delivery
note.
2. Check the shipment for transportation
damage. Report any transportation dam-
age.

4.1 Unpacking

NOTICE
!
Risk of solenoid valve damage due to for-
eign particles entering the valve.
Do not remove the packaging and protective
film/protective caps until immediately before
mounting and start-up.
1. Remove the packaging from the solenoid
valve.
2. Dispose of the packaging in accordance
with the valid regulations.

4.2 Transporting

− Protect the solenoid valve against exter-
nal influences (e.g. impact).
− Protect the solenoid valve against mois-
ture and dirt.
− Observe transport temperature depend-
ing on the permissible ambient tempera-
ture (see technical data in section 3.2).
24

4.3 Storage

NOTICE
!
Risk of solenoid valve damage due to im-
proper storage.
− Observe storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor-
age conditions or long storage periods.
Storage instructions
− Protect the solenoid valve against exter-
nal influences (e.g. impact, shocks, vi-
bration).
− Do not damage the corrosion protection
(coating).
− Protect the solenoid valve against mois-
ture and dirt. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Observe storage temperature depending
on the permissible ambient temperature
(see technical data in section 3.2).
− Store solenoid valve with the cover
closed.
− Seal the pneumatic and electrical con-
nections.
EB 3966 EN