Measures For Preparation; Unpacking; Transporting; Storage - Samson EB 3967 EN Mounting And Operating Instructions

4 Measures for preparation

After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received with the delivery
note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent (re-
fer to delivery note).

4.1 Unpacking

NOTICE
!
Risk of solenoid valve damage due to
foreign particles entering the valve.
Î Do not remove the packaging if the
solenoid valve is to be transported to
another location or kept in storage. Do
not remove the protective film/protective
caps until immediately before mounting
the device on the valve.
Before mounting the solenoid valve, proceed
as follows:
1. Remove the packaging from the solenoid
valve.
2. Dispose of the packaging in accordance
with the valid regulations.

4.2 Transporting

Î Pack the solenoid valve properly to com-
ply with terms of transportation.
EB 3967 EN
Measures for preparation
Transport instructions
− Protect the solenoid valve against exter-
nal influences (e.g. impact).
− Protect the solenoid valve against mois-
ture and dirt.
− Observe transport temperature depend-
ing on the permissible ambient tempera-
ture (see technical data in section 3.2).

4.3 Storage

NOTICE
!
Risk of solenoid valve damage due to
improper storage.
Î Observe the storage instructions. Contact
SAMSON, if need be.
Storage instructions
− Protect the solenoid valve against exter-
nal influences (e.g. impact, shocks, vi-
bration).
− Do not damage the corrosion protection
(coating).
− Protect the solenoid valve against mois-
ture and dirt. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Observe storage temperature depending
on the permissible ambient temperature
(see technical data in section 3.2).
− Store solenoid valve with closed cover in
airtight packaging.
35