Advertisement
Pumpverter
Operation
Use in building site for manual control water supply where empty pipes require quick fill
up which is achieved by running pumps at full speed. After parameters set, when S2-
COM switch is turned on, pump runs at maximum set frequency (full speed).
Relevant Parameter Setting
According to the application use section 6.4 to set other parameters first and then set
auxiliaries b05.02=2.
6.8 Water Supply Control Using Pressure Switch
System Wiring
Figure 11 Pressure switch based control wiring diagram
Figure 10 Manual/Auto control wiring
Pumpverter
Pumpverter
29
Pumpverter
In diagram;
(1) Pumpverter
Intelligent Controller
(2) Pumps
(3) Air Pressure Tank
(4) Pressure Switch
(5) Water Level Switch
Advertisement
