Unpacking And Assembly; Technical Data - Nakayama MB2510 Manual

Table of Contents

Available languages

Safety decal

Should this decal become unreadable after being worn, faded, or otherwise damaged during operation, order a replacement decal from your local

authorized dealer.

UNPACKING AND ASSEMBLY

Technical Data

MB2510

Model

Displacement

52 cc

Horsepower

2.2 hp

Cutting width

30 cm

Includes

4 Cutting blades

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the

performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the

manufacturer's product line with similar features and may not be included in the product you just acquired.

To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments,

must only be carried out by technicians of the authorized service department of the manufacturer.

Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The

manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

Unpacking the cultivator

Carefully lift the mini cultivator out of the box, remove any packaging

material and cut any ties holding the handlebar pieces to the cultivator

assembly.

Assembly

1. Place the cultivator upright with the tines and wheels on a clean and

level surface. Wheels should be set in the lowest position. DO NOT

place the cultivator on a high surface from where it can fall and cause

damage or injury.

2. Attach the lower bar and place the bolts (46141) and the nuts to hold

the handlebar in place.