Dealer Pre-Delivery Checklist - H&S 5242 Operator's Manual

DEALER PRE-DELIVERY CHECK LIST
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Top Shot has been completely set-up, check to be certain it is in correct operating order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you have
made the proper adjustments and found the item operating satisfactorily.
Top Shot was not damaged in shipment. Check for dents and loose or missing parts. Report
damage immediately to H&S Manufacturing Co., Inc.
All bolts and fasteners are tight.
Top Shot has been correctly assembled according to instructions in this manual. Wheel nuts
and all other fasteners are tightly secured.
All grease fittings have been lubricated. Gearbox is filled to proper level.
See Lubrication Chapter of this manual for details.
Hoses and fittings are properly attached and there are no visible leaks.
Guards and shields are secure.
Wheels are properly mounted.
Tires are inflated to correct pressure.
Chain tension is properly adjusted. See Adjustment Chapter of this manual.
Decals are in place and legible.
Connect the Top Shot onto a proper horsepower 1000 RPM tractor and attach the PTO.
Connect the lights. Run the Top Shot and make sure all components operate properly.
PTO guard turns freely.
Discharge door operates smoothly.
Main Auger operates up and down smoothly.
Hydraulic system does not leak under pressure.
Lights and wiring functioning properly.
Electronic Scale (if provided) operates properly.
Implement and all components are functioning properly.
Model Number
Serial Number
Dealer's Name
Inspection Date
Signature of Pre-Delivery Inspector
-3-