Dealer Pre-Delivery Checklist - H&S 5226 Operator's Manual

DEALER PRE-DELIVERY CHECKLIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Top Shot has been completely set up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item
as you have made the proper adjustments and found the item operating satisfactorily.

Top Shot was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.

All bolts and fasteners are tight.

Top Shot has been correctly assembled according to instructions in this manual.
Wheel nuts and all other fasteners are tightly secured.

All grease fittings have been lubricated. Gearboxes are filled to proper levels if
applicable. See Lubrication Chapter of this manual for details.

Hoses and fittings are properly attached and there are no visible leaks.

Guards and shields are secure.

Wheels are properly mounted.

Tires are inflated to correct pressure.

Chains tension is properly adjusted. See Adjustment Chapter of this manual.

Decals are in place and legible.
Connect the Top Shot onto a proper horsepower 540 RPM or 1000 RPM (if applicable)
tractor and attach the PTO. Connect the lights. Run the Top Shot and make sure all
components operate properly.

PTO guard turns freely.

Discharge door operates smoothly.

Main Auger operates up and down smoothly.

Hydraulic system does not leak under pressure.

Lights and wiring functioning properly.

Electronic Scale (if provided) operates properly.

Implement and all components are functioning properly.
Inspection Date____________________ Model Number _______________________________
Serial Number______________________________________________
Dealer's Name ________________________________________________________________
Signature of Pre-Delivery Inspector _______________________________________________
-5-