Dealer Pre-Delivery Checklist - H&S 7116 Operator's Manual

DEALER PRE-DELIVERY CHECKLIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the rake has been completely set up, check to be certain it is operating correctly before deliv-
ering to the customer. The following is a list of points to inspect. Check off each item as you have
made the proper adjustments and found the item operating satisfactorily.

Rake was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.

Rake has been correctly assembled according to the set-up instructions. Wheel nuts
and all other fasteners are tightly secured.

All bolts and fasteners are tight.

All grease fittings have been lubricated. See Lubrication Chapter of this manual for
details.

Hoses and fittings are properly attached and there are no visible leaks.

All mechanisms are operating trouble free.

Rake wheels touch ground in unison when lowered into position. (Rake setting level)

Wheels are properly mounted.

Tires are inflated to correct pressure.

Decals are in place and legible.
Model Number
Serial Number
Dealer's Name
Inspection Date
Signature of Pre-Delivery Inspector
-5-