Dealer Pre-Delivery Checklist - H&S 1236 Operator's Manual

DEALER PRE-DELIVERY CHECKLIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Top Dog has been completely set up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as
you have made the proper adjustments and found the item operating satisfactorily.

Top Dog was not damaged in shipment. Check for dents and loose or missing
parts. Report damage immediately to H&S Manufacturing Co., Inc.

Top Dog has been correctly assembled according to instructions in this
manual. Wheel nuts and all other fasteners are tightly secured.

All bolts and fasteners are tight.

All shields and guards are in place and fastened.

All grease fittings have been lubricated. Both final drive assemblies are at proper
gear lube level in site glass. (See Lubrication Chapter in this manual).

Hoses and fittings are properly attached and there are no visible leaks.

All mechanisms are operating trouble free.

Apron chains are adjusted properly.

Decals are in place and legible.
Model Number ______________________________________________
Serial Number ______________________________________________
Dealer's Name _________________________________________________________________
Inspection Date _____________________________________________
Signature of Pre-Delivery Inspector _________________________________________________
-5-