Optional Equipment - H&S 5242 Operator's Manual

OPTIONAL FEATURES & ACCESSORIES
NOTE: The optional features & accessories listed in this chapter, are shipped with separate
instruction for installation, as applicable.
AUGER SPEED OPTIONS
Several different drive sprockets are available to change auger speeds to various spreading needs.
Sprockets are available as service parts.
EXPELLER SPEED OPTIONS
Several different drive sprockets are available to change expeller speeds to various spreading needs.
Sprockets are available as service parts.
SAFETY CHAINS
An appropriate-sized safety chain, to accommodate the potential weight of the loaded Top Shot, is
available.
ELECTRONIC SCALES & COMPONENTS
Model: Digi-Star GT400
An optional factory installed Digi-Star GT400 scale is available for accurate
weight measurement for each load spread. The 5-point weighbar system
features 3 modes, Net, Tare and Gross.
Model: Digi-Star NT460
An optional factory installed Digi-Star NT460 scale system is
available for accurate weight measurement and displaying
actual tons per acre. The Indicator has GPS capability and
stores pounds of manure spread on individual fields.
HYDRAULIC OPENING/LOCKING LID
The optional Hydraulic Opening Lid can be installed
on the 5242. The lid can be installed as right or left
side opening. A third tractor remote is needed to
open and close the lid. After the lid is hydraulically
closed, activate the electrical toggle switch with
the remote lever activated to hydraulically rotate
the lock clamp bar over the 4 pins.
Lock Clamp Bar
Toggle
Switch
-27-
Pins (4)