Set-Up & Assembly - H&S 5242 Operator's Manual

NOTE: Determine right or left side of the Top Shot by viewing it from the rear. If instructions or parts
lists call for hardened bolts, refer to bolt torque chart.
WHEELS & TIRES
The Top Shot may be shipped without the wheels/tires installed.
1. Assemble the Top Shot and check for proper assembly and adjustment. Make sure that all
bolts are tightened.
2. Attach the wheels with tires, using the lug nuts furnished, and torque the mounting hardware to
the appropriate torque listed in the Service Chapter. Check wheel bolts periodically thereafter.
3. Inflate the tires to the appropriate pressure listed in the Service Chapter.
4. Check the Top Shot for proper assembly and adjustment and make sure that all bolts are
tightened.
5. Securely retighten after a few hours of operation, as bolts can loosen up on new machinery.
6. Lubricate the Top Shot completely.
SET-UP & ASSEMBLY
-13-