Static Mode; Dmx Control - ProLights ECLJZIPLZ1530 User Manual

12

3.13 STATIC MODE

This fixture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the fixture.
• To enable the static mode, press MODE repeatedly until Stand Alone shows on the display.
• Set the strobo value Strobe (000 - 255), through the buttons UP/DOWN, then press ENTER to confirm.
• Set the dimmer value Dimmer (000 - 255), through the buttons UP/DOWN, then press ENTER to confirm.

3.14 DMX CONTROL

ECLJZIP
1 CHANNEL
MODE
FUNCTION
1 Ch
DIMMER
1
0~100%
3 CHANNELS
MODE
FUNCTION
3 Ch
DIMMER
1
0~100%
STROBE
2 No Function
Strobe Slow to Fast
Dimmer Speed Mode
Preset dimmer speed from display menu
Dimmer speed mode off
3
Dimmer speed mode 1 (fast speed)
Dimmer speed mode 2 (middle speed)
Dimmer speed mode 3 (slow speed)
DMX
Value
000 - 255
DMX
Value
000 - 255
000 - 010
011 - 255
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255