Polycom ReadiConvene MGC+50 Getting Started Manual page 25

Setting Up a ReadiConvene™ System
Changing Computer Network Settings
To connect to the ReadiConvene system, change the TCP/IP settings to the
following values:
•
•
To configure network settings
1
2
3
Polycom, Inc.
IP Address: 192.168.1.37
Subnet Mask: 255.255.255.0
These steps assume you use Microsoft Windows XP. If you have a different
version of Windows, the steps and screens may be slightly different.
Record the original IP address and subnet mask of your computer, so
that you can restore these values after you have finished system
setup.
From the Start menu, choose Control Panel > Network Connections
> Local Area Connection Properties.
Select Internet Protocol (TCP/IP), and then click Properties.
19