Mgc+50/100 Component Locations - Polycom ReadiConvene MGC+50 Getting Started Manual

Setting Up a ReadiConvene™ System
ReadiConvene Precautions
When installing the ReadiConvene appliance, use a regulating UPS to
protect the ReadiConvene system from power surges and voltage spike
and to keep it operating in case of a power failure.

MGC+50/100 Component Locations

Figure 1-1 shows part of the front panel of the MGC+50/100. The front
panel provides access to the ReadiConvene IAM blade, the MGC+50/100
Main Control Module, Functional Modules, and Power Supply Modules.
Status LEDs on the ReadiConvene IAM, Main Control Module, Functional
Modules, and Power Supply Modules indicate the status of the system.
The ReadiConvene IAM blade is located on the left side of the appliance.
Figure 1-1
Polycom, Inc.
MGC+50/100 Partial Front View
ReadiConvene IAM
Shut Down
button
Compact Flash
slot
Universal
Serial Bus port
MGC+ Functional
MGC+ Control
Modules
Unit (CU)
5