Connect Scanner - Microtek ArtixScan DI 3130c Start Here Manual

Connect Scanner

To the power adapter
A. Connect the power adapter to the back of the scanner.
B. Plug one end of the power cord into
the power adapter, and plug
the other end of the power cord into
a wall outlet or other power source.
To the Hi-Speed USB cable
C. Connect one end of the cable to your computer.
D. Connect the other end of the cable to the scanner's USB port.
E. Turn the power switch at the back panel of your scanner to "On"; once the scanner
is detected by your system, the LED (green) will brighten, and the scanner is ready to
scan.
Customize the Function Button
The ArtixScan DI 3130c is equipped with one Select and one Enter buttons, used to
automate a number of customized and predefined operations, such as scanning to a file,
sending an image to your printer, scanning for OCR, etc. Customizing is done through
the Scanner Button Settings interface in the ScanWizard DI, refer to the scanner's User's
Manual for more details.
LED Display:
Show the selected
function number.
B
A
• Select: Toggle through the number lists of
your preferred functions.
Select button
• Enter: Start scan and carry out the result
Enter button
of the selected function number.
3
D
E
C