Microtek ArtixScan DI 3130c Start Here Manual page 5

Position Documents (Cont.)
To Load Cards
1. Slide the Guide Arms toward the center
of the feed tray and free up the enough
space to put the Card Holder.
2. To install the Card Holder into the feed
tray, with its front side up, slide the
Card Holder along the sides of the Guide
Arms down until it completely hangs on
the arms.
After installed, there will be a slot
hollow space between the Card Holder
and the Document Feed Tray for loading
the card.
3. Insert the card into the slot hollow
space between the Card Holder the feed
tray until it meets resistance, with the
side to be scanned facing up and the
top edge facing toward the feeder.
NOTE: When scanning a card, you have to
choose ADF (Duplex) in the Scan Source
drop-down menu as your image input device;
otherwise, it may cause incorrect or unwanted
results for your scanned images.
Guide Arms
5
Card Holder