Section 5 System: Service; General Maintenance - ESAB Cutmaster 100 Operating Manual

All manuals and user guides at all-guides.com
5.01

General Maintenance

Warning!
Disconnect input power before maintaining.
Visually inspect the torch body tip,
electrode, start cartridge and shield cup
Replace all
broken parts
Art # A-07938_AB
Manual 0-5404
SECTION 5 SYSTEM:
SERVICE
Each Use
Visual check of
torch tip and electrode
Weekly
Visually inspect the
cables and leads.
Replace as needed
3 Months
6 Months
Visually check and
Carefully clean the
interior
SERVICE
ESAB CuTmASTEr 100
Maintain more often
if used under severe
conditions
Clean
exterior
of power supply
5-1