Table of Contents
Advertisement
be sure this information reaches the operator.
You can get extra copies through your supplier.
These INsTRUCTIONs are for experienced operators. If you are not fully
familiar with the principles of operation and safe practices for arc welding
and cutting equipment, we urge you to read our booklet, "Precautions and
safe Practices for arc Welding, Cutting, and Gouging," Form 52-529. Do
NOT permit untrained persons to install, operate, or maintain this equip-
ment. Do NOT attempt to install or operate this equipment until you have
read and fully understand these instructions. If you do not fully understand
these instructions, contact your supplier for further information. be sure to
read the safety Precautions before installing or operating this equipment.
This equipment will perform in conformity with the description thereof contained in this manual and
accompanying labels and/or inserts when installed, operated, maintained and repaired in accordance
with the instructions provided. This equipment must be checked periodically. Malfunctioning or
poorly maintained equipment should not be used. Parts that are broken, missing, worn, distorted
or contaminated should be replaced immediately. Should such repair or replacement become
necessary, the manufacturer recommends that a telephone or written request for service advice
be made to the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the
manufacturer. The user of this equipment shall have the sole responsibility for any malfunction which
results from improper use, faulty maintenance, damage, improper repair or alteration by anyone
other than the manufacturer or a service facility designated by the manufacturer.
ReaD aND UNDeRsTaND THe INsTRUCTION MaNUaL beFORe INsTaLLING OR
All manuals and user guides at all-guides.com
CAUTION
USER RESPONSIBILITY
!
OPeRaTING.
PROTeCT YOURseLF aND OTHeRs !
Advertisement
Table of Contents
