Power Supply Specifications - ESAB Cutmaster 100 Operating Manual

ESAB CuTmASTEr 100
2.04

Power Supply Specifications

Input Power
Input Power Cable
Output Current
Power Supply Gas
Filtering Ability
Ambient Temperature
All Units
* NOTE: The duty cycle will be reduced if the primary input power (AC) is low or the output
NOTE!
IEC Rating is determined as specified by the International Electro-Technical Commission. These specifications include
calculating an output voltage based upon power supply rated current. To facilitate comparison between power supplies, all
manufacturers use this output voltage to determine duty cycle.
Power Supply Dimensions & Weight
10.75"
273 mm
16.375"
416 mm
30.5"
63 lb / 28.6 kg 774.7 mm
2-2
All manuals and user guides at all-guides.com
ESAB Cutmaster 100 Power Supply Specifications
®
380 VAC (360 - 440 VAC),
400 VAC (360 - 440 VAC),
Power Supply includes input cable.
30 - 100 Amps, Continuously Adjustable
Particulates to 5 Microns
ESAB Cutmaster 100 Power Supply Duty Cycle *
®
Duty Cycle Ratings @ 40° C (104° F)
Operating Range 0° - 50° C
Duty Cycle 40%
IEC
Rating
100A
Current
120
DC Voltage
voltage (DC) is higher than shown in this chart.
Art # A-08358_AB
INTRODUCTION
Three Phase , 50/60 Hz
Three Phase , 50/60 Hz
60% 100%
CE IEC CE IEC
80A 70A
112 108
Ventilation Clearance Requirements
24"
610 mm
6"
150 mm
CE
Art # A-07925_AB
Manual 0-5404