Section 5 System: Service; General Maintenance - ESAB Cutmaster 100 Operating Manual

5.01 General Maintenance

Warning!
Disconnect input power before maintaining.
Visually inspect the torch body tip,
electrode, start cartridge and shield cup
Replace all
broken parts
Art # A-07938_AB
300X5397

SECTION 5 SYSTEM: SERVICE

Visual check of
torch tip and electrode
Visually inspect the
cables and leads.
Replace as needed
Visually check and
Carefully clean the
interior
ESAB CUTMASTER 100
Each Use
Weekly
3 Months
Clean
exterior
of power supply
6 Months
SERVICE
Maintain more often
if used under severe
conditions
5-1