Daikin EPRA10EAV3 Installer's Reference Manual page 301

Field settings table
Breadcrumb Field code Setting name
9.I [E-0C] What bizone system type is installed?
9.I [E-0D] Is the system filled with glycol ?
9.I [E-0E] --
9.I [F-00] Pump operation allowed outside range.
9.I [F-01] Above which outdoor temperature is cooling allowed?
9.I [F-02] --
9.I [F-03] --
9.I [F-04]
--
9.I [F-05] --
9.I [F-06] Enable Tank Boiler?
9.I [F-07] Efficiency calculation
9.I [F-08]
Continuous heating defrost enable
9.I [F-09]
Pump operation during flow abnormality.
9.I [F-0A] --
9.I [F-0B] Close shut-off valve during thermo OFF?
9.I [F-0C] Close shut-off valve during cooling?
9.I [F-0D] What is the pump operation mode?
9.I [F-0E] Tank heating support_max
Bizone kit settings
9.P.1 [E-0B] Bizone kit installed
9.P.2 [E-0C] Bizone system type
9.P.3 [7-0A] Add zone pump fixed PWM
9.P.4 [7-0B] Main zone pump fixed PWM
9.P.5 [7-0C] Mixing valve turning time
(*1) 300 Tank_(*2) 500 Tank_
(*3) *X*_(*4) *H*_(*5) *B*_
(*6) EKECBUA3V_(*7) EKECBUA6V_(*8) EKECBUA9W_
(*9) BUH less
Range, step
Default value
R/W 0: Without hydraulic separator / no
direct pump
1: With hydraulic separator / no direct
pump
2: With hydraulic separator / with direct
pump
R/W 0: No
1: Yes
0
R/W 0: Disabled
1: Enabled
R/W 10~35°C, step: 1°C
20°C
3
5
0
0
R/W
0: Disabled
1: Enabled
R/W
0: Enabled
1: Disabled
R/W 0: Disabled
1: Enabled
R/W 0: Disabled
1: Enabled
0
R/W 0: No
1: Yes
R/W 0: No
1: Yes
R/W 0: Continuous
1: Sample
2: Request
R/W 10~35 kW, step: 1kW
20 kW
R/W 0: Not installed
1: -
2: Bizone kit installed
R/W 0: Without hydraulic separator / no
direct pump
1: With hydraulic separator / no direct
pump
2: With hydraulic separator / with direct
pump
R/W 20~95%, step 5%
95%
R/W
20~95%, step 5%
95%
R/W
20~300 sec, step 5 sec
125 sec
13/13
Installer setting at variance with
default value
Date Value
4P670987-1A - 2022.02