Daikin EPRA10EAV3 Installer's Reference Manual page 17

EPRA08~12EAV3+W1 + ETSH/X(B)12P30+50EF
Daikin Altherma 3 H MT ECH₂O
4P663478-1B – 2022.07
WARNING
Make sure installation, servicing, maintenance and repair comply with instructions
from Daikin and with applicable legislation and are executed ONLY by authorised
persons.
Mounting the outdoor unit (see
WARNING
Fixing method of the outdoor unit MUST be in accordance with the instructions from
this manual. See
Mounting the indoor unit (see
WARNING
Fixing method of the indoor unit MUST be in accordance with the instructions from
this manual. See
Opening and closing the units (see
DANGER: RISK OF ELECTROCUTION
Do NOT leave the unit unattended when the service cover is removed.
DANGER: RISK OF ELECTROCUTION
DANGER: RISK OF BURNING/SCALDING
Piping installation (see
DANGER: RISK OF ELECTROCUTION
During the filling process, water can escape from any leaking point and can cause an
electrical shock if it comes into contact with live parts.
▪
Before the filling process, de-energise the unit.
▪
After the first filling and before switching on the unit with the mains switch, check
whether all electric parts and connection points are dry.
WARNING
The field piping method MUST be in accordance with the instructions from this
manual. See "8 Piping
WARNING
The discharge pipes from the pressure relief valves MUST terminate in a safe and
visible position without forming any risk to persons in the vicinity.
WARNING
▪
Discharge piping, tundish, drain valves, etc. MUST be positioned away from any
electrical components.
▪
The discharge pipe away from the tundish MUST terminate in a safe, visible
position without forming any risk to persons in the vicinity.
3 Specific installer safety instructions
|
"7.3 Mounting the outdoor
"7.3 Mounting the outdoor
"7.4 Mounting the indoor
"7.4 Mounting the indoor unit" [
"7.2 Opening and closing the
4
"8 Piping installation" [
4
installation" [ 86].
4
unit" [ 76])
unit" [ 4 76].
unit" [ 4 83])
4
83].
units" [
86])
Installer reference guide
4
71])
17