Daikin EPRA10EAV3 Installer's Reference Manual page 196

10 | Configuration
Time/date
Holiday
Installer reference guide
196
# Code
[7.2] N/A
INFORMATION
By default, daylight savings time is enabled and clock format is set to 24 hours. If you
want to change these settings, you can do this in the menu structure (User
settings > Time/date) once the unit is initialised.
About holiday mode
During your holiday, you can use the holiday mode to deviate from your normal
schedules without having to change them. While holiday mode is active, space
heating/cooling operation and domestic hot water operation will be turned off.
Room frost protection and anti-legionella operation will remain active.
Typical workflow
Using holiday mode typically consists of the following stages:
1 Activating the holiday mode.
2 Setting the starting date and ending date of your holiday.
To check if holiday mode is activated and/or running
If is displayed on the home screen, holiday mode is active.
To configure the holiday
1 Activate the holiday mode.
▪ Go to [7.3.1]: User settings > Holiday > Activation.
7.3.1
Activation
From
Till
▪ Select On.
2 Set the first day of your holiday.
▪ Go to [7.3.2]: From.
▪ Select a date.
▪ Confirm the changes.
3 Set the last day of your holiday.
▪ Go to [7.3.3]: Till.
▪ Select a date.
▪ Confirm the changes.
Description
Set the local time and date
EPRA08~12EAV3+W1 + ETSH/X(B)12P30+50EF
—
—
—
Daikin Altherma 3 H MT ECH₂O
4P663478-1B – 2022.07