Activation - Xtool IP608 User Manual

!
Note: When connected to the OBD port, the device can be automatically charged via the car battery. The scan
tool can standby for one day in sleep mode and up to 3 months when power off. It is recommended to switch off
your Scan Tool after use!

ACTIVATION

After first-time users press and hold the power button to turn on the system, the system will automatically enter the guided
process and request the user to select the language for the operating system.
After setting the system language, click Next to enter the Wi-Fi connection page, as shown below:
Select a network to connect to on the Wi-Fi connection page. You need to enter the Wi-Fi password to establish Wi-Fi
connectivity and the activation page, as shown in the figure below. You can also click the "Trial" button in the upper right
corner to try it out before activation. However, activation is highly recommended to take advance of any new online software
updates.
5