Milesight EM400-MUD User Manual page 8

occupancy status change, it will report immediately.
NB Version:
Standard Mode/Bin Mode: 30 minutes as default, range: 1~1440 minutes.
Collecting interval of measuring distance on Parking Lot Mode. Default:
Collecting Interval
20s; Range: 1~600s
Set the installation height between device and ground when in Parking Lot
Mode. Default: 3m; Range: 0.030~4.500m
Threshold Distance Value (Δ) is 1m as default, triggering logic is as below:


Installation Height
Tilt & Distance When detecting that the offset angle is greater than 20 degrees, turn off
Switch the distance sensor.
Change Password Change the password for ToolBox App or software to access this device.
NB Version Only
Cumulative
Store this number of periodic packets to report together.
Numbers
Positioning Enable GNSS positioning. When the device is on motion status, it will only
Settings upload positioning data instead of distance data.
The duration of When device is detected to move beyond this duration, it will upload a
Motion GNSS data packet.
The duration of When device is detected to stop moving beyond this duration, it will upload
stationary a GNSS data packet.
Motion Report
The interval to report GNSS data during the motion.
Interval/Min
Installation Height - Detected Distance < Δ, the sensor will reports
occupied immediately.
Installation Height - Distance Distance > Δ, the sensor will reports
vacant immediately.
8