Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
The device must not be disassembled or remodeled in any way.
In order to protect the security of the device, please change the device password when first
configuration. Default password is 123456.
The device is not intended to be used as a reference sensor, and Milesight won't should
responsibility for any damage which may result from inaccurate readings.
Do not place the device close to objects with naked flames.
Do not place the device in where the temperature is below/above the operating range.
Make sure both batteries are newest when install, or battery life will be reduced.
The device must never be subjected to shocks or impacts.
Declaration of Conformity
EM400-MUD is in conformity with the essential requirements and other relevant provisions of
the CE, FCC, and RoHS.
Copyright © 2011-2023 Milesight. All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Milesight IoT Co., Ltd.
Revision History
Date
March 30, 2023
June 15, 2023
Doc Version
Description
V 1.0
Initial version
V 1.1
Add EM400-MUD NB/Cat M Version
For assistance, please contact
Milesight technical support:
Email:
iot.support@milesight.com
Support Portal:
support.milesight-iot.com
Tel: 86-592-5085280
Fax: 86-592-5023065
Address: Building C09, Software Park III,
Xiamen 361024, China
2
Need help?
Do you have a question about the EM400-MUD and is the answer not in the manual?