Table of Contents
Advertisement
If frequency is one of CN470/AU915/US915, enter the index of the channel
that you want to enable and make them separated by commas.
Examples:
1, 40: Enabling Channel 1and Channel 40
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
Spread Factor
If ADR is disabled, the device will send data via this spread factor.
If the device does not receive ACK packet from network server, it will resend
Confirmed Mode
data once.
Reporting interval ≤ 35 mins: the device will send a specific number of
LinkCheckReq MAC packets to the network server every reporting interval or
Rejoin Mode
2*reporting interval to validate connectivity; If there is no response, the device
will re-join the network.
Reporting interval > 35 mins: the device will send a specific number of
11
Advertisement
Table of Contents
Need help?
Do you have a question about the EM400-MUD and is the answer not in the manual?