Wacker Neuson RTLx-SC3 Operator's Manual page 64

Operation
6.27 Changing Drums
wc_gr010672
2 1 7
Fig. 37: Narrow scraper
64
Fig. 36: Install the screws
5. Install the three M16 x 25 screws (4) to the drum in the locations
shown. Use Loctite 243 or equivalent on the screws and torque them to
210 Nm (155 ft. lbs.).
6. Install the narrow scraper (7) using the three screws and washers from
step 1. Use Loctite 243 or equivalent on the screws and torque them to
86 Nm (63 ft. lbs.).
7. Repeat the procedure for each drum.
Operator's Manual | RTLx-SC3 | 5100061327 | 09/2022 | [en-US]
M16x80
5
M16x25
4
wc_gr010671