How To Make Your Own Custom Program; Settings; Upload; Reset - SHOWTEC Spectral PC 1800Z IP Manual

Spectral PC 1800Z IP

7.1. How to make your own custom program

01) First, start with PROGRAM1 and add the desired settings in SCENE-01, then SCENE-02, etc.
02) In this way you can add a maximum of 30 scenes.
03) After that, you can start with PROGRAM2 and create a maximum of 30 scenes again.
04) You can repeat these steps, until you've reached PROGRAM10, SCENE-30.
05) It is possible to create 300 separate scenes.

8. Settings

With this menu you can set the device's settings.
01) While in the main menu, press the UP/DOWN buttons to choose SETTING.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN and press the ENTER button to confirm.
04) Press the UP/DOWN buttons to toggle between the following menus: Upload, Reset, Color, Dimmer,
DMX Error, PWM, Full_Power CCT.

8.1. Upload

With this menu, you can export current programs from the master device to the connected slave
devices.
01) While in SETTING menu, press the UP/DOWN buttons to choose UPLOAD.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN and press the ENTER button to confirm.
04) The device will light up yellow. When the process is finished, the display will show OK.
05) If there are any problems with exporting, the master and the slave devices will light up red.
06) If the operation was completed successfully, the master and the slave devices will light up green.

8.2. Reset

With this menu, you can reset the custom programs.
01) While in SETTING menu, press the UP/DOWN buttons to choose RESET.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order:
UP,DOWN,UP,DOWN and press the ENTER button to confirm.
04) When the process is finished, the display will show OK. The custom programs will have been reset.
Ordercode: 43553
18