Related Manuals for SHOWTEC 43552
Summary of Contents for SHOWTEC 43552
- Page 1 USER MANUAL ENGLISH Spectral PC 1200Z IP65 Product code: 43552 Firmware version: 2.0.3 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Spectral PC 1200Z IP65 Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Main Menu Options ............................23 Static colors ..............................23 DMX Address ...............................24 Auto Programs ............................24 Run Mode ..............................24 Zoom Mode ..............................24 Personality ..............................25 Edit .................................25 Settings ................................26 Reset ..............................27 DMX Error ..............................27 Key .................................27 Calibration ...............................28 White Calibration ..........................28 Product code: 43552... - Page 4 Preventive Maintenance ..........................36 Basic Cleaning Instructions ........................36 Draining Condensation Water .........................37 Corrective Maintenance ..........................37 Deinstallation, Transportation and Storage ....................38 Instructions for Deinstallation ..........................38 Instructions for Transportation ........................38 Storage ................................38 10. Disposal ................................38 11. Approval ................................38 Product code: 43552...
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Spectral PC 1200Z IP65 ● Schuko to Seetronic power cable (1,5 m) ● Safety cable ●... -
Page 6: Symbols And Signal Words
Minimum distance from lighted objects. Replace any cracked protective shield. Caution: Risk of electric shock. Do not open. Caution: To reduce the risk of electrical shock, do not remove cover. No user- serviceable parts inside. Refer servicing to qualified personnel. Product code: 43552... -
Page 7: Safety
Keep the connectors sealed with the rubber caps when the connectors are not in use. ● Do not connect the cables from above the connectors, if the device is installed outdoors. Make a ‘drip loop’ in the cable so that rain water cannot enter the device. Product code: 43552... - Page 8 This device is not suitable for households and for general lighting. ● This device is not designed for permanent operation. ● This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. Product code: 43552...
-
Page 9: Requirements For The User
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device. Product code: 43552... -
Page 10: Description Of The Device
Description of the Device The Showtec Spectral PC 1200Z is a 120 watt RGBW LED Array spot to wash Parcan with a fast and wide 4.5°–36° motorized zoom range, suitable for in- and outdoor applications. Each function, including its 0–... -
Page 11: Product Specifications
Die-cast aluminum Color: Black IP rating: IP65 Cooling: Convection Thermal: Maximum ambient temperature t 40 °C Minimum ambient temperature: -10 °C Minimum distance: Minimum distance from flammable surfaces: 0,8 m Minimum distance to lighted object: 0,8 m Product code: 43552... -
Page 12: Dimensions
Spectral PC 1200Z IP65 Dimensions Fig. 04 Fig. 05 Fig. 06 Fig. 07 Product code: 43552... -
Page 13: Installation
The device can be mounted to a truss or other rigging structure in any orientation. ● The minimum distance between the light output and the illuminated surface must be bigger than 0,8 m. ● The maximum ambient temperature t = 40 °C must never be exceeded. Product code: 43552... -
Page 14: Rigging
Put the safety cable through the safety eye (08), as shown in Fig. 09. You can use the safety cable supplied with the device. Fig. 08 Fig. 09 Product code: 43552... -
Page 15: Angle Adjustment
02) Tilt the device at the desired angle (see Fig. 10). 03) Turn the adjustment screws (06) clockwise to tighten them. Make sure that the device cannot move freely after the adjustment screws (06) are tightened. Fig. 10 Product code: 43552... -
Page 16: Connecting To Power Supply
Do not link more devices on one power link than the maximum recommended number. Maximum recommended number of devices: ● at 100–120 V: 7 devices Spectral PC 1200Z IP65 ● at 200–240 V: 14 devices Spectral PC 1200Z IP65 Product code: 43552... -
Page 17: Setup
In order to connect more than 32 devices on one data link, you must use a DMX optically isolated splitter/booster, otherwise this may result in deterioration of the DMX signal. Note: ● Maximum recommended DMX data link distance: 300 m ● Maximum recommended number of devices on a DMX data link: 32 devices Product code: 43552... -
Page 18: Dmx Cables
Set all subsequent devices in the setup as slave devices. See 6.6.4 Run Mode on page 24 for more information. Connect a DMX terminator (120 Ω resistor) to the DMX OUT connector of the last device in the setup. Fig. 12 Product code: 43552... -
Page 19: Dmx Linking
04) Continue assigning the starting addresses of the remaining devices by adding each time 17 to the previous number. Make sure that you do not have any overlapping channels in order to control the Spectral PC 1200Z IP65 correctly. If two or more devices are addressed similarly, they will work similarly. Product code: 43552... -
Page 20: Operation
See 6.6.8. Settings on pages 26–27 for more information. To operate the device with a DMX controller: 01) Select DMX mode in the Run Mode menu. See 6.6.4. Run Mode on page 24 for more information. Product code: 43552... -
Page 21: Control Panel
Start-up Upon start-up the display shows a splash screen with the Showtec logo. Afterwards the display shows the start screen. The start screen provides information about the temperature of the LEDs, the DMX starting address of the device, and the selected DMX channel mode: Press the ENTER button or the UP/DOWN buttons to enter the main menu. -
Page 22: Menu Overview
Spectral PC 1200Z IP65 Menu Overview Product code: 43552... - Page 23 Spectral PC 1200Z IP65 Product code: 43552...
-
Page 24: Main Menu Options
Adjust the zoom. The adjustment range is 0–255, from narrow angle to wide angle ● STROBE: Add strobe effect. The adjustment range is 0–25, from OFF to high frequency Press the ENTER button to set the value and to move to the next setting. Product code: 43552... -
Page 25: Dmx Address
MODE 1: Fast zoom speed (default setting). Use this setting when T > 0 °C ● MODE 2: Slow zoom speed. Use this setting when T < 0 °C 02) Press the ENTER button to confirm the selection. Product code: 43552... -
Page 26: Personality
BLUE: Set the intensity of the blue color. The adjustment range is 0–255, from low to high intensity ● WHITE: Set the intensity of the white color. The adjustment range is 0–255, from low to high intensity Product code: 43552... -
Page 27: Settings
600 Hz, 1200 Hz, 2000 Hz, 2400 Hz, 6000 Hz, and 25000 Hz ● FULL POWER CCT: Set the CCT (Correlated Color Temperature). The available options are 3200 K, 4200 K, 5600 K and NORMAL 04) Press the ENTER button to confirm the selection. Product code: 43552... -
Page 28: Reset
The access to the main menu remains unlocked after the display turns off 02) Press the ENTER button to confirm your choice. Note: If you turn off the display lock, this will not affect the submenus which by default require a password. Product code: 43552... -
Page 29: Calibration
04) Press the ENTER button to set the value and to move to the next setting. Note: If you change the values for a predefined white color in this submenu, the CCT in the respective DMX channel will be changed as well. Product code: 43552... -
Page 30: Information
RDM: You can see the Unique Identifier (UID) and the name (LABEL) of the device 02) The Unique Identifier (model ID) for the Spectral PC 1200Z is 29B40460 03) Press the ENTER button to confirm the selection. Product code: 43552... -
Page 31: Dmx Channels
9 CH 12 CH 17 CH Intensity Hue Fine Saturation Master Dimmer Master Dimer Fine Red Fine Green Green Fine Blue Blue Fine White White Fine Color Macros Strobe Auto Programs Speed Zoom Zoom Reset Dimmer Speed Product code: 43552... -
Page 32: Hsic (9 Channels)
Preset dimmer speed from the display menu 010–029 030–069 DIM 1 Dimmer Speed 070–129 DIM 2 130–189 DIM 3 190–255 DIM 4 Note: Make sure that the Intensity channel is open in order to see the light output. Product code: 43552... -
Page 33: Ssp (9 Channels), Tour (12 Channels), Tr16 (17 Channels)
Auto program 4 081–090 Auto program 5 Auto Programs 091–100 Auto program 6 101–110 Auto program 7 111–120 Auto program 8 121–130 Auto program 9 131–140 Auto program 10 141–150 Custom program 1 151–160 Custom program 2 Product code: 43552... - Page 34 Preset dimmer speed from the display menu 010–029 030–069 DIM 1 Dimmer Speed 070–129 DIM 2 130–189 DIM 3 190–255 DIM 4 Note: Make sure that the Master Dimmer channel is open in order to see the light output. Product code: 43552...
-
Page 35: Rdm Information
RDM Information This device supports RDM. Refer to 6.8.2. Supported RDM PIDs (Parameter IDs) for more information. RDM Details ● Responder: 29B4:046xxxxx ● Manufacturer's ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: Spectral PC1200Z IP65 ●... -
Page 36: Troubleshooting
LEDs are damaged your Highlite International dealer No light or LEDs cut The power supply settings do not out intermittently ● Disconnect the device. Check the match local AC voltage and settings and correct, if necessary frequency Product code: 43552... -
Page 37: Maintenance
Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. ● Make sure that the connections are fully dry before connecting the device to the power supply and to other devices. Product code: 43552... -
Page 38: Draining Condensation Water
Corrective Maintenance The device does not contain user-serviceable parts Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. Product code: 43552... -
Page 39: Deinstallation, Transportation And Storage
For more detailed information about recycling of this product contact the local authorities or the authorized dealer. Approval Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity. Product code: 43552... - Page 40 ©2022 Showtec...
Need help?
Do you have a question about the 43552 and is the answer not in the manual?
Questions and answers