Table of Contents
Advertisement
Performer 2500 Fresnel Tungsten
Control Panel
●
Use the MENU button to exit the current submenu, to return to the Main Menu and to return to the
start screen.
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.
●
Use the rotatable controls to adjust settings in Knob mode. See 6.6.1. Knob Mode on page 25 for
more information.
Start-up
Upon start-up the display will show a splash screen with the logo of Showtec. Press any button to enter
the password and/or enter the Main Menu.
Note:
●
If no button is pressed, after the preset number of seconds of inactivity, the display will turn off. Press
any button to turn the display on. See 6.6.8. Disp Time (Display Time) on page 29 for more
information.
●
By default the display is locked. To access the main menu, you need to enter the password.
The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN,
ENTER. Deactivating the display lock does not affect the submenu items which by default require a
password. See 6.6.7. Disp Key (Display Lock) on page 29 for more information.
Product code: 33141
A) OLED display
B)
UP button
C) DOWN button
D) Control 1
E)
Control 2
F)
Control 3
G) ENTER button
H)
MENU button
Fig. 15
22
Advertisement
Table of Contents
