SHOWTEC Performer 2500 Fresnel Tungsten V1 User Manual page 15

Performer 2500 Fresnel Tungsten
To mount the device, follow the steps below:
01) Use a clamp to attach the device to the supporting structure, as shown in Fig. 07. Make sure that the
device cannot move freely. Optionally, you can use the Slide Complete to attach the device.
02) Secure the device with a secondary suspension, for example a safety cable. Make sure that the
secondary suspension can hold 10 times the weight of the device. If possible, the secondary
suspension should be attached to a supporting structure independent of the primary suspension. Put
the safety cable through the safety eye (07), as shown in Fig. 07.
Product code: 33141
14
Fig. 07