Table of Contents
Advertisement
WARNING DIAGRAM
Bateria
COMUNICADORES
General characteristics
• Up to 32 total zones
• 2 partitions
• 2 wired PGM outputs + possibility of 4 Wireless PGM outputs
• Panel and/or communicator programming via Keyboard/Cellular/PC
• Possibility to use and program communicators with LED keypads (KPD-800/G-
LED732)
• Schedule of Days/Times for automatic arming/disarming
• Panel arming by non-movement time
• Configuration and Choice of events to be reported.
• Event blocking for faults or repeated tripping (Optional)
• Possibility to report by various means configurable from Scenarios of communi-
cation
• 512 event memory
• Shutdown of the alarm panel due to low battery voltage. Previously sent low
battery event and panel shutdown (avoids false triggers).
• Direct integration with Pivot Access family of access control systems
• Zone configuration in special modes: Double Trigger and/or Zone Crossing
• 13 different zone programming
• Simple operation of 2 partitions from a single keyboard
• Compatible with 3G-COM-G/4G-MAX-G and IP-500G family of communicators
SECTION 1: System Introduction
This manual is designed to help you through the installation process of the PC-
732G® Alarm Panel. We suggest that you read this manual, in its entirety, before
beginning the installation process so that you can better understand all that this
security system has to offer. This manual is not intended for end users. End users
are recommended to read the User Manual provided with the system. If you have
any questions regarding the procedures described in this manual, please log on to
www.garnet.com.ar/Soporte_Tecnico/Consultas.
4
Transformador
16.5 VAC
25 VA
50/60 Hz
Rojo +
Negro -
EXP-8Z
E1
C
E2 E3
C
E4 E5
C
E6 E7
C
- AUX +
+ BELL -
A
B
PGM1 PGM2 Z1
SIRENA
1.4A Max.
G-LED732/G-LCD732/G-LCD732RF
+ BUS - A
STATUS
RUNNING
E8
1.1 Specifications
Programming
• Local programming via keypads.
• Local programming via PC-Link cable (adapter cable).
• Remote programming via 3G-COM-G/4G-MAX-G AC4 software.
• Remote programming via IP-500G and AC4 software.
Partitions
The system has 2 independent partitions, as well as the possibility of sharing zones
in any of them, obtaining partitions with zones common to 2 partitions.
Flexible Zone Configuration
• 32 fully programmable zones with 19 different operating configurations and 8
different, individual attributes for each zone.
• 1 additional zone for each keypad installed.
• Zone circuit with single RFL.
• Fire zones with fault discrimination and alarm.
• Using EXP-8Z zone expanders, the system supports up to 24 wired zones.
additional (maximum 3 expanders)
• With KPD-860RF/G-LCD732RF keypads (one is sufficient), the system supports up
to 24 wireless zones (out of 32 available).
• Crossing areas
• Zones of Group Inhibition
Codes
The equipment has 36 codes available for the following functions:
• 1 master code.
• 31 user codes.
• 2 duress codes (individual for each partition).
• 1 installer code.
• 1 Local Programming Code by Cable Adapter (PC-Link).
C
Z2
Z3
C
Z4
Z5
C
Z6
N.O.
N.C.
B
Z MIC
RFL
RFL
2.2K
2.2K
RFL
2.2K
N.O.
N.C.
RFL
2.2K
Magnético
Advertisement
Table of Contents
