Table of Contents
Advertisement
Command Number 260: Partitioning Options No. 1
Default values -----------------------> 0
2
6
0
Positions -----------------------------> (1)
Digit position (1): Bell Chirp in Away Arm
0 = Disabled
1 = Enabled
Digit position (2): Bell Chirp when Armed Present
0 = Disabled
1 = Enabled
Digit Position (3): Force Arming by Keypad, Keyswitch and Remote Controls
0 = Disabled
1 = Enabled
Digit position (4): Force Arming for Automatic and/or Remote Arming
0 = Disabled
1 = Enabled
Digit position (5): Future Use
0 = Reserved for Future Use.
1 = Reserved for Future Use.
Digit position (6): Future Use
0 = Reserved for Future Use
1 = Reserved for Future Use
Digit position (7): Enable Auto-Arm by No Movement Time
(Inactivity)
0 = Disabled
1 = Enabled
Digit position (8): Future Use
0 = Reserved for Future Use.
1 = Reserved for Future Use.
Note: Commands 260 to 261 (Partitioning Options) are programmed in the same
way as Command No. 260.
Command Number 261: Partitioning Options No. 2
Default values -----------------------> 0
2
6
1
Positions ------------------------------> (1)
Command Number 270: Panel Options ( I )
Default values -----------------------> 0
2
7
0
Positions ------------------------------> (1)
Digit position (1): Future Use
0 = Future Use
1 = Future Use
Digit position (2): Future Use
0 = Future Use
1 = Future Use
Digit position (3): TX-500 Keyfob Panic Siren Response
0 = Silent Panic
1 = Audible Panic
Digit position (4): Fire Siren Sound
0 = Pulsing
1 = Temporary 3
Digit position (5): Hide Police Emergency Message
0 = Disabled
1 = Enabled
Digit position (6): Siren Triggering by Wireless Sensor Tampers
0 = Disabled
1 = Enabled
Digit position (7): Activate Energy Saving Mode
0 = Disabled
1 = Enabled
Digit position (8): Installer's Code Lock
0 = Disabled
1 = Enabled
Command Number 271: Panel Options ( II )
Default values -----------------------> 0
2
7
1
Positions ------------------------------> (1)
Digit position (1): Bypass Zones Without Code
0 = Disabled
1 = Enabled
Digit position (2): Control of non-Code PGMs
0 = Disabled
24
0
0
0
0
0
(2)
(3)
(4)
(5)
(6)
(7)
0
0
0
0
0
(2)
(3)
(4)
(5)
(6)
0
0
0
0
0
(2)
(3)
(4)
(5)
(6)
0
0
0
0
0
(2)
(3)
(4)
(5)
(6)
1 = Enabled
0
0
Digit position (3): Quick Arming/Disarming
0 = Disabled
1 = Enabled
(8)
Digit position (4): Double Trigger (In the same zone)
0 = Disabled
1 = Enabled
Digit position (5): Siren Trigger between triggers for Crossing Zones
0 = Disabled
1 = Enabled
Digit position (6): Manual entry of card ID in the reader
0 = Disabled
1 = Enabled
Digit position (7): Future Use
0 = Future Use
1 = Future Use
Digit position (8): Future Use
0 = Future Use
1 = Future Use
Command Number 280: Automatic Arming Time of Partition No. 1
Default values ------------------------------>
Positions--------------------------------------------------->
Digit positions (1) - (4): Automatic Arming Time of Part No. 1
Valid values are 0-9. Time must be entered in 24 HS format.
Note: Commands 280 to 281 (Automatic Partition Arming Time) are programmed
in the same manner as Command No. 280.
Command Number 281: Automatic Arming Time of Partition No. 2
Default values ------------------------------>
Positions --------------------------------------------------->
0
0
Command Number 284: Partition No. 1 Automatic Disarming Time
Default values ------------------------------>
(7)
(8)
Positions --------------------------------------------------->
0
0
Digit positions (1) - (4): Automatic Disarming Time of Part No. 1
Valid values are 0-9. Time must be entered in 24 HS format.
(7)
(8)
Note: Commands 285 to 287 (Automatic Partition Disarming Time) are
programmed in the same manner as Command No. 284.
Command Number 285: Partition No. 2 Automatic Disarm Time Defaults
Default values ------------------------------>
Positions--------------------------------------------------->
Command Number 290: Automatic Arming Days of Partition No.1
Default values ---------------------------------> 0
Positions ----------------------------------------> (1)
Digit position (1): Monday
0 = Disabled
1 = Enabled
Digit position (2): Tuesday
0 = Disabled
1 = Enabled
Digit position (3): Wednesday
0 = Disabled
1 = Enabled
Digit position (4): Thursday
0 = Disabled
1 = Enabled
Digit position (5): Friday
0
0
0 = Disabled
1 = Enabled
(7)
(8)
Digit position (6): Saturday
0 = Disabled
1 = Enabled
Digit position (7): Sunday
0 = Disabled
1 = Enabled
0
2
8
0
(1)
0
2
8
1
(1)
0
2
8
4
(1)
0
2
8
5
(1)
0
0
2
9
0
(2)
(3)
0
0
0
(2)
(3)
(4)
0
0
0
(2)
(3)
(4)
0
0
0
(2)
(3)
(4)
0
0
0
(2)
(3)
(4)
0
0
0
0
(4)
(5)
(6)
(7)
Advertisement
Table of Contents
