Powering On In Standby Mode; Powering Off; Entering The Main Menu; Entering The Power Menu - Lectrosonics LT/E01 Instruction Manual

LT/E01

Powering On in Standby Mode

A brief press of the Power Button
the counter has reached 3, will turn the unit on with the
RF output turned off. In this Standby Mode the menus
can be browsed to make settings and adjustments with-
out the risk of interfering with other wireless systems
nearby.
Release Power
Hold
Button before
for
the counter
reaches 3 to
Rf On
enter standby
...1
After settings and adjustments are made, press the
power button again to turn the unit off.
NOTE: Also see the section entitled Entering The
Power Menu for the AutoOn feature.

Powering Off

From any screen, power can be
Powering
turned off by selecting Pwr Off in the
O . . .
power menu, holding the Power
Button
countdown, or with the program-
mable switch (if it is configured for
1
this function).
If the power button is released, or the top panel switch
is turned back on again before the countdown is com-
pleted, the unit will remain turned on and the LCD will
return to the same screen or menu that was displayed
previously.
NOTE: If the programmable switch is in the OFF
position, power can still be turned on with the
power button. If the programmable switch is then
turned on, a brief message will appear on the LCD.

Entering the Main Menu

The LCD and keypad interface makes it easy to browse
the menus and make the selections for the setup you
need. When the unit is powered up in either the oper-
ating or the standby mode, press MENU/SEL on the
keypad to enter a menu structure on the LCD. Use the
and arrow buttons to select the menu item. Then
press the MENU/SEL button to enter the setup screen.
Gain
LineIn
Freq.
ProgSw
Rf On?
The prompt in the upper right corner may
AutoOn?
display one or both arrows, depending upon
what adjustment can be made. If the changes
Backlit
are locked, a small padlock symbol will appear.
LED Off
8
, releasing it before
RF indicator blinks
b 19
5
1
494.500
mode
-40 -20
in and waiting for the
Gain
25
-40 -20 0
AutoOn?
Backlit
LED Off
About

Entering the Power Menu

Press the power button
and a menu with appear with several options. Use the
and arrow buttons to select the menu item. Then
press MENU/SEL to execute the item or enter a setup
screen. See opposite page for details.
Resume
Pwr Off
Rf On?
AutoOn?
0
Resume and Pwr Off will execute the command imme-
diately. The other menu items will open a screen asking
for a value to be selected.
The screens that prompt for a selection to be made
are straightforward as in this example. Use the UP and
DOWN arrows to highlight the desired selection an
press MENU/SEL or BACK to confirm it.
Resume
Pwr Off
Rf On?
AutoOn?

RF ON/OFF on the Main and Power Menus

The RF output of the transmitter can be turned off and
on with a menu item on both the main menu and on the
power menu.
Rf On? in the main menu:
StepSiz
Phase
Locked
Rf On?
Rf On? in the power menu:
Resume
Pwr Off
Rf On?
AutoOn?
from any menu or screen
Resume
Resume and Pwr Off
Pwr Off
will execute
the command
Rf On?
immediately
AutoOn?
AutoOn?
No
Yes
Rf On?
No
Yes
Press MENU/SEL and
the power will turn off
immediately.
LECTROSONICS, INC.