Lcd Menu Map; Power Menu Options - Lectrosonics LT/E01 Instruction Manual

LCD Menu Map

Gain
SEL
Gain
22
BACK
Polarity
SEL
LineIn
BACK
Freq
SEL
Freq.
BACK
ProgSw
SEL
ProgSw
BACK
Rolloff
SEL
Rolloff
70 Hz
BACK
Compat
SEL
Compat
Hybrid
BACK
StepSiz
SEL
StepSiz
BACK
Phase
SEL
Phase
BACK
Locked?
SEL
Locked
BACK
Rf On?
SEL
Rf On?
BACK
BatType
SEL
BatType
BACK
Remote
SEL
Remote
BACK
Default
SEL
Default
settings
BACK

Power Menu Options

A special menu is provided by pressing the power but-
ton from any screen or menu when the unit is turned
on in either the Operating or Standby modes. The menu
includes several options. Use the
tons to select the menu item.
• Resume - returns to the previous mode and screen
• Pwr Off - turns the unit off irrevocably
• Rf On? - enters a screen to enable the operating or
standby modes
Rio Rancho, NM
Use arrow keys to
Select from
select input gain
listing
Line Use arrow keys to select
Instr.
audio output polarity
Use arrow keys
b 21
to select desired
80
550.400 frequency
TalkBk
Use arrow keys to select
Power
Mute LCD backlight duration
(none)
Use arrow keys to
Select from
select input gain
listing
Select from Use arrow keys to select
listing
compatibility mode
Use arrow keys to select
100 kHz
25 kHz
frequency step size
Pos. Use arrow keys to select
Neg.
audio output polarity
Use arrow keys to
Yes
No
lock/unlock keypad
Use arrow keys to turn Rf
No
Yes
signal on/off
Alk. Use arrow keys to
Lith.
choose battery type
Enable Use arrow keys to
Ignore
enable/disable remote
Use arrow keys to return
No
Yes
transmitter to default factory
settings
and arrow but-
Digital Hybrid Wireless Belt-Pack Transmitter
Press SEL to
select desired
adjustment
• AutoOn? - allows the unit to automatically turn
back on after a power failure or when fresh batter-
ies are installed (works in the operating mode only)
• Backlit - adjusts the duration of the LCD back light
to 30 seconds or 5 minutes, or to remain on
• LED Off - turns the LEDs on (Normal) or off (Dark)
• About - displays the installed firmware version.
• Blk606? - enables Block 606 legacy mode for use
with block 606 receivers
NOTE: This feature is only avaialable on Bands B1
or C1.
9