Powering On In Operating Mode; Powering On In Standby Mode; Powering Off; Power Menu Options - Lectrosonics DBa Instruction Manual

DBa

Powering On in Operating Mode

Press and hold the Power Button
until a counter on the LCD progresses from 1 through 3.
Hold DBa
for
V1.03
Rf On
...3
When you release the button, the unit will be operation-
al with the RF output turned on and the Main Window
displayed.

Powering On in Standby Mode

A brief press of the Power Button
the counter has reached 3, will turn the unit on with the
RF output turned off. In this Standby Mode the menus
can be browsed to make settings and adjustments with-
out the risk of interfering with other wireless systems
nearby.
Release Power
Hold
Button before
for
the counter
reaches 3 to
Rf On
enter standby
...1
After settings and adjustments are made, press the
power button again to turn the unit off.
NOTE: Also see the section entitled Power Menu
for the AutoOn feature.

Powering Off

From any screen, power can be
Powering
turned off by selecting Pwr Off in the
O . . .
power menu, holding the Power
Button
countdown, or with the program-
mable switch (if it is configured for
1
this function).
If the power button is released, or the top panel switch
is turned back on again before the countdown is com-
pleted, the unit will remain turned on and the LCD will
return to the same screen or menu that was displayed
previously.
NOTE: If the programmable switch is in the OFF
position, power can still be turned on with the
power button. If the programmable switch is then
turned on, a brief message will appear on the LCD.
8
for several seconds
DBa
470.100
-40 -20
, releasing it before
RF indicator blinks
DBa
470.100
mode
-40 -20
in and waiting for the

Power Menu Options

Entering the Power Menu

Press the power button
or screen and a menu will appear with several options.
Use the
Then press MENU/SEL to execute the item or enter a
setup screen. The following options are available:
• Resume - returns to the previous mode and screen
+0
• Pwr Off - turns the unit off irrevocably
• Rf On? - enters a screen to enable the operating or
standby modes
• AutoOn? - allows the unit to automatically turn
back on after a power failure or when fresh batter-
ies are installed (works in the operating mode only)
• Backlit - adjusts the duration of the LCD back light
to 30 seconds or 5 minutes, or to remain on
• About - displays model number and firmware
version
+0
once briefly from any menu
and arrow buttons to highlight menu items.
LECTROSONICS, INC.