Introduction - Ametek MTC-140 A User Manual

1.0

Introduction

Congratulations on your new Ametek JF
Instruments MTC-Calibrator!
With the Ametek JF Instruments calibrator, you have chosen an
extremely effective instrument which we hope will live up to all your
expectations. Over the past many years, we have acquired extensive
knowledge of industrial temperature calibration. This expertise is
reflected in our products which are all designed for daily use in an
industrial environment. Please note that we would be very interested in
hearing from you if you have any ideas or suggestions for changes to
our products.
This user manual applies to the following instruments:
ISO-9001 certified
4
•
MTC-140 A
•
MTC-320 A
•
MTC-650 A
Ametek Denmark A/S was awarded the
ISO-9001 certificate in September 1994 by
BVQI - Bureau Veritas Quality International.
26-07-2004
(with RS232)
(with RS232)
(with RS232)
105337 02