Table of Contents
Advertisement
No.
Alarms
48
Fail To Close Gen Output
Fail To Close Mains
49
Output
50
Fail To Open Gen Output
51
Fail To Open Mains Output
52
Gen PH-PH Overvolt
53
Gen PH-PH Undervolt
54
Reverse Power Detected
User manual 4189341340A EN
Causes/Indication
Breaker close failure. Unable to close the genset
breaker.
Breaker close failure. Unable to close the mains
breaker.
Breaker close failure. Unable to open the genset
breaker.
Breaker close failure. Unable to open the mains
breaker.
Over-voltage measured for the phase-to-phase
generator voltage. This is only for three-phase, 3 wires
applications.
Under-voltage measured for the phase-to-phase
generator voltage. This is only for three-phase, 3 wires
applications.
Alarm is based on the active power (all phases), to the
source, as measured by the controller.
Actions
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Electrical Trip
Notification
Shutdown
Warning
Shutdown
Warning
Shutdown
Warning
Electrical Trip
Notification
Page 53 of 76
Advertisement
Table of Contents
