Technical Data; Sterilization Programs - W&H Lexa PLUS Instructions For Use Manual

Technical data

CONTENTS
This section deals with the following subjects:
Sterilization programs
Sterilization cycle phases
Technical data
Recommendations for validation
Diagrams
Water quality
Accessories, spare parts, consumables
Authorized W&H service partners

Sterilization programs

WARNINGS
WARNING! For your safety and for the safety of your patients:
Never process objects different from those specified in the cycle program table and never exceed the maximum load weight limits
specified in it. Such actions could result in non-sterile conditions at the end of the cycle, could expose people to the hazard of
cross-infections, are considered as an improper use of the sterilizer for which the manufacturer cannot be hold responsible.
An improper use of these profiles will result in wet load at the end of the cycle, exposing the load to a contamination due to
improper storage.
The display reminds the maximum permitted load before starting a cycle. All indications of sterile load or successful completion of
the cycle that are given on the display at the end of the cycle are not valid if the type and quantity of the load are not complied
with.
90 Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
90
93
97
98
99
100
102
104