Electrical Connection - WEG AFW900 User Manual

Installing

4.4 ELECTRICAL CONNECTION

ATTENTION!
The following information is a guide for the proper installation. Comply with the applicable local
regulations for electrical installations.
DANGER!
Make sure the supply line is disconnected before starting the connections.
DANGER!
Do not use the neutral for grounding, but a specific conductor.
DANGER!
The supply line voltage must be compatible with the AFW900 voltage range.
Assemble and connect all the devices sent separately for shipment reasons, carefully checking their position and
connection in the respective drawings.
Remove all the anchorage or locking devices installed for shipment from the component parts.
Check the mechanical operation of all manual operating devices, such as disconnect switch, circuit breakers, limit
switches, mechanical interlockings, auxiliary contacts and their actuators.
Make the permanent connection of the outlet/dehumidifier module circuit and panel lighting even before the panel
is energized to avoid the formation of moisture inside.
28 | AFW900