Product Operation - WEG AFW900 User Manual

5 PRODUCT OPERATION

After checking that all installations were properly made, follow the procedure to operate the product.
Check that the control circuit breakers Q2 and Q3 are on.
„
During activation, the door must be closed.
„
Close the circuit breakers/disconnect switch Q1.
„
Check the "Powered Panel" indication.
„
Set the parameters on the HMI according to the project.
„
Check that the emergency button is pressed.
„
Check the "Defect" indication; if activated, solve it before proceeding with the procedure.
„
Use the on and off buttons to control the system.
„
NOTE!
In case of remote operation, the remote emergency button must be checked, and the system can
be controlled using the remote buttons.
Product Operation
AFW900 | 32