Canopen/Dnet Communication - WEG AFW900 User Manual

General Information

2.4.3 CANopen/DNet Communication

1
CANopen/DNet module (CFW900-CCAN-W).
Every device on the CANopen network must have an address between 1 and 127. This address must be different
for each device.
Devices with CANopen interface generally allow the configuration of the baud rate, which depends on the length
A
of the cable used in the installation.
B
Pin
1
C
2
3
4
5
D
E
12 | AFW900
2
Figure 2.3: CCAN-W
Table 2.3: Plug-in connector pinout for CANopen
Name
V- Negative pole of the power supply
CAN_L CAN_L communication signal
Shield
CAN_H CAN_H communication signal
V+ Positive pole of the power supply
Function
208-240 cable shield
3