INSTALLATION
WALL DRILLING AND BRACKET FIXING
B
A
C
Vertical reference line
As a first step, proceed with the following drawings:
A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the
hood is to be fitted.
A horizontal line A at 1083–1183 mm above the cooker top.
A horizontal line B at a 40-377mm above the horizontal line A.
A horizontal line C at a 116mm below the horizontal line A.
Mark Points:
Mark a point (1) on the horizontal line A, 60 mm to the vertical reference line.
Repeat this operation on the other side , checking that the two marks are leveled.
Mark a point (2) on the horizontal line B, 60 mm to the vertical reference line.
Repeat this operation on the other side , checking that the two marks are leveled.
60
60
(2)
60
60
(1)
80
80
(3)
5