Page 1
Midea Cooker Hood Instructions MODEL: MHC60GSS MHC90GSS SAVE THESE INSTRUCTIONS CAREFULLY Read the instructions carefully before using your cooker hood, and keep them carefully. If you follow the instructions, your cooker hood will serve you many years well.
RECOMMENDATIONS AND SUGGESTIONS The instructions apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your appliance. INSTALLATION ● The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
INSTALLATION WALL DRILLING AND BRACKET FIXING As the first step, proceed with the following drawings: ● A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted. ●...
● Mark a point (3) on the horizontal line C, 80 mm to the vertical reference line. ● Repeat this operation on the other side, checking that the two marks are on one horizontal line. Mark a point (3) on the horizontal line C, 80 mm to the vertical reference line. ...
CHIMNEY ASSEMBLY The chimney can only be installed with an exhausting hood. Lower decorative chimney ● Fix the chimney fixing bracket 21 onto the lower decorative chimney with 2 screws 12 (4.2 x 9.5) supplied with the hood. Upper Decorative Chimney ●...
Page 8
MOTOR OFF SWITCH: Press this switch to stop the motor. SPEED SWITCH: Press this switch, and the motor runs at LOW speed. SPEED SWITCH: Press this switch, and the motor runs at MEDIUM speed. SPEED SWITCH: Press this switch, and the motor runs at HIGH speed. LIGHT ON/OFF SWITCH: Press this switch to turn on the light, and press again to turn it off.
MAINTENANC GREASE FILTER METAL SELF-SUPPORTING GREASE FILTER CLEANING ● The filters must be cleaned every 2 months of operation or more frequently for particularly heavy usage, and can be washed in a dishwasher. ● Pull the comfort panel to open them. ●...
Page 10
LED LIGHT REPLACEMENT LED LIGHT REPLACEMENT DISMANTLE LED LIGHT MODULE Replacing the light modules LED LIGHT MODULE DISMANTLEMENT ou cannot replaced the light bulbs, the entire light module has to be replaced. Replacing the light module When changing the light modules, the contacts are live. ...
TROUBLE SHOOTING Fault Cause Solution The blade is blocked. The capacitor is damaged. Replace the capacitor. Light is on, but The motor is damaged. Replace the motor. motor does not work The internal wiring of motor is cut off/ disconnected. An unpleasant smell may Replace the motor.
Page 12
3 years for the life of the appliance. FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA MIDEA HOME APPLIANCES AUSTRALIA PTY LTD 11/75 Lorimer Street, Docklands, Melbourne, 3008 After-sales service No.: 1800 88 60 10...