Installation; Wall Drilling And Bracket Fixing - Midea CMPTRAL-SG60 User Manual

INSTALLATION

WALL DRILLING AND BRACKET FIXING

A
(2)
B
B
(OPTIONAL)
135
C
112.5
As a first step, proceed with the following drawings:
 A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the
hood is to be fitted.
 A horizontal line A at 1270 – 1560 mm above the cooker top.
 A horizontal line B at a minimum 887 (840 optional) mm above the cooker top.
 A horizontal line C at a minimum 717 mm above the cooker top.
Mark Points:
 Mark a point (1) on the horizontal line A, 40 mm to the right of the vertical reference line.
 Repeat this operation on the other side, checking that the two marks are leveled.
 Mark a point (2) on the horizontal line B, 80 (135 optional) mm to the right of the vertical
reference line.
 Repeat this operation on the other side and on the vertical reference line, checking that the
three marks are leveled.
40
(1)
40
80
80
135
(3)
112.5
12
EN-5
21
10
20
10
Optional
10
11
11
11