Installation - Midea E60MEW2A09 Instruction Manual

INSTALLATION

WALL DRILLING AND BRACKET FIXING
B
A
C
Vertical reference line
As a first step, proceed with the following drawings:
A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood

to be fitted.

A horizontal line A at 980 – 1080 mm above the cooker top.

A horizontal line B at a X mm above the horizontal line A.

A horizontal line C at a 261 mm below the horizontal line A.
Mark Points:

Mark a point (1) on the horizontal line A, 80 mm to the vertical reference line.

Repeat this operation on the other side and on the vertical reference line, checking that the
three marks are leveled.

Mark a point (2) on the horizontal line B, 40 mm to the vertical reference line.

Repeat this operation on the other side , checking that the two marks are leveled.
Mark a point (3) on the horizontal line C, 180 mm to the vertical reference line .


Repeat this operation on the other side , checking that the two marks are leveled.
Fix the brackets :
Drill holes at the marked points with a ɸ10 mm drill bit.


Insert the Wall Plugs 11 into the holes.

Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) at the horizontal line A.
Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B ( optional ).

40
(2)
40
80 80
(1)
180 180
(3)
Option Chimney
5
1
400+0
2 400+300 390-620
3 400+390 390-710
X
/