Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Midea MHC60SS
Summary of Contents for Midea MHC60SS
- Page 1 Midea Cooker Hood Instructions MODEL: MHC60SS MHC90SS SAVE THESE INSTRUCTIONS CAREFULLY Read the instructions carefully before using your cooker hood, and keep them carefully. If you follow the instructions, your cooker hood will serve you many years well.
-
Page 2: Recommendations And Suggestions
RECOMMENDATIONS AND SUGGESTIONS The instructions apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your appliance. INSTALLATION ● The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. - Page 3 COMPONENTS Ref. Qty. Product Components Hood Body, complete with Control, Light, Blower, Filter. Lower Decorative Chimney Upper Decorative Chimney Exhaust Pipe Activated Charcoal Filter (optional) Qty. Documentation Instruction Manual Ref. Qty. Standard Installation Components Screws 5 x 50 Wall Plug Screws 4,2 x 9,5 Screws 5 x 12 Hood Fixing Bracket...
- Page 4 DIMENSION Option Chimney 400+0 400+300 730-970...
-
Page 5: Installation
INSTALLATION WALL DRILLING AND BRACKET FIXING Option Chimney 400+0 400+300 390-620 As the first step, proceed with the following drawings: ● A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted. - Page 6 Hook the hood body ● Hook the hood body to the bracket 20. ● Level the hood body itself. ● Lock screws (M5*12) into the hood fixing bracket to prevent the hood body from accidentally sliding off. ● Remove the filter from the inside of the hood body, and fix the screw 10 to wall plug 11 at the point (3) (optional).
-
Page 7: Chimney Assembly
CHIMNEY ASSEMBLY The chimney can only be installed with an exhausting hood. Lower decorative chimney ● Fix the lower decorative chimney to the hood body with 2 screws 12 (4.2 x 9.5) supplied with the hood. Upper Decorative Chimney ● Slightly widen the two sides of the upper chimney and hook them between the wall and the bracket 21 which is fixed on the lower decorative chimney. - Page 8 Speed adjustment MOTOR OFF SWITCH: Press this switch to stop the motor. SPEED SWITCH: Press this switch, and the motor runs at LOW speed. SPEED SWITCH: Press this switch, and the motor runs at MEDIUM speed. SPEED SWITCH: Press this switch, and the motor runs at HIGH speed. LIGHT ON/OFF SWITCH: Press this switch to turn on the light, and press again to turn it off.
-
Page 9: Led Light Replacement
MAINTENANC GREASE FILTER METAL SELF-SUPPORTING GREASE FILTER CLEANING ● The filters must be cleaned every 2 months of operation or more frequently for particularly heavy usage, and can be washed in a dishwasher. ● Pull the comfort panel to open them. ●... - Page 10 ● Remove the grease filter, and carefully remove 2 screws from the front plate (a cross headed screwdriver will be needed to remove the screws). ● Disconnect the terminal of LED light. ● Press LED light at the back of the front plate, and take it out. ●...
-
Page 11: Troubleshooting
TROUBLE SHOOTING Fault Cause Solution The blade is blocked. Check the blade. The capacitor is damaged. Replace the capacitor. Light is on, but The motor is damaged. Replace the motor. motor does not work The internal wiring of motor is cut off/ disconnected. - Page 12 3 years for the life of the appliance. FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA MIDEA HOME APPLIANCES AUSTRALIA PTY LTD 11/75 Lorimer Street, Docklands, Melbourne, 3008 After-sales service No.: 1800 88 60 10...